China Golden Vidar Nozzle Pressure Gasket C13 2.00-2.54mm 0.02mm First Gear for C11 C13 C15 Fuel Injectors bevel gearbox

Product Description

 

Entire body Content Metal merchandise design WYW-YZJM-C15
Engine product C13
C15
C11
Transportation Bundle Neutra packaging
Guarantee six Months Specification regular
Certification ISO9001 Trademark Golden Vidar 
Origin China discharge stan dard Euro II

 

Q1:What is your conditions of packing?

A: Typically, we pack our products in neutral white bins and brown cartons If you have lawfully registered patent, we can pack the goods in your branded boxes following obtaining your authorization letters.

Q2: Can you generate according to the samples?

A: Sure, we can produce by your samples or technological drawings. We can create the molds and fixtures.

Q3: What is your sample plan?

A: We can offer the sample if we have prepared areas in stock, but the consumers have to spend the sample cost and the courier cost.

Q4: Do you test all your products before supply?

A: Of course, we have a hundred% check prior to shipping

Q5: Do you have the stock?

A: Most of our goods are in stock.

Q6: If we make the purchase, can we shell out as the an personal?

A: Or we should make the contract for each and every supply? We settle for Western Union, PayPal, T/T. For little order, we recommend Western
Union and PayPal. For PayPal, you may want to pay further 5% of whole quantity to go over the PayPal value. For T/T, you will need to pay further 50USD to go over the bank cost and dealing with expense if get less than 1000USD.

Q7: What is your common way of supply?

A: Usually we ship with DHL, UPS, EMS. We also send by sea by bulk purchase. To Russia, We can also ship with Russian line. Russian
line is a shipment way despatched by truck and teach.

Q8: How can you ensure the good quality?

A: If you fulfill with good quality difficulty, we guarantee to change products or return your resources.

Q9: If we will not uncover what we want on your internet site, what should we do?

A: You can email us the descriptions and photographs of the items you require, we will examine whether we have them. We produce new objects every single month, and some of them have not been uploaded to internet site in time. Or you can send us sample By categorical, we will produce this merchandise for bulk getting.

Q10: If we never find what we want on your website, what need to we do?

A: You can email us the descriptions and images of the products you require, We will check out no matter whether we can make it.

 
 
 

Warranty: 6 Months
Certification: ISO9001
Discharge Standard: Euro II
Body Material: Steel
Cylinder: Other
Fuel: Diesel

###

Body Material Steel product model WYW-YZJM-C15
Engine model C13
C15
C11
Transport Package Neutra packaging
Warranty 6 Months Specification standard
Certification ISO9001 Trademark Golden Vidar 
Origin China discharge stan dard Euro II

###

Q1:What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
Q2: Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q3: What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q4: Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q5: Do you have the stock?
A: Most of our products are in stock.
Q6: If we make the order, can we pay as the an individual?
A: Or we should make the contract for each delivery? We accept Western Union, PayPal, T/T. For small order, we recommend Western
Union and PayPal. For PayPal, you’ll need to pay extra 5% of total amount to cover the PayPal cost. For T/T, you’ll need to pay extra 50USD to cover the bank charge and handling cost if order less than 1000USD.
Q7: What is your usual way of delivery?
A: Usually we send with DHL, UPS, EMS. We also send by sea by bulk order. To Russia, We can also send with Russian line. Russian
line is a shipment way sent by truck and train.
Q8: How can you guarantee the quality?
A: If you meet with quality problem, we promise to replace goods or return your funds.
Q9: If we don’t find what we want on your website, what should we do?
A: You can email us the descriptions and pictures of the products you need, we will check whether we have them. We develop new items every month, and some of them have not been uploaded to website in time. Or you can send us sample By express, we will develop this item for bulk purchasing.
Q10: If we don’t find what we want on your website, what should we do?
A: You can email us the descriptions and pictures of the products you need, We will check whether we can make it.
Warranty: 6 Months
Certification: ISO9001
Discharge Standard: Euro II
Body Material: Steel
Cylinder: Other
Fuel: Diesel

###

Body Material Steel product model WYW-YZJM-C15
Engine model C13
C15
C11
Transport Package Neutra packaging
Warranty 6 Months Specification standard
Certification ISO9001 Trademark Golden Vidar 
Origin China discharge stan dard Euro II

###

Q1:What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
Q2: Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q3: What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q4: Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q5: Do you have the stock?
A: Most of our products are in stock.
Q6: If we make the order, can we pay as the an individual?
A: Or we should make the contract for each delivery? We accept Western Union, PayPal, T/T. For small order, we recommend Western
Union and PayPal. For PayPal, you’ll need to pay extra 5% of total amount to cover the PayPal cost. For T/T, you’ll need to pay extra 50USD to cover the bank charge and handling cost if order less than 1000USD.
Q7: What is your usual way of delivery?
A: Usually we send with DHL, UPS, EMS. We also send by sea by bulk order. To Russia, We can also send with Russian line. Russian
line is a shipment way sent by truck and train.
Q8: How can you guarantee the quality?
A: If you meet with quality problem, we promise to replace goods or return your funds.
Q9: If we don’t find what we want on your website, what should we do?
A: You can email us the descriptions and pictures of the products you need, we will check whether we have them. We develop new items every month, and some of them have not been uploaded to website in time. Or you can send us sample By express, we will develop this item for bulk purchasing.
Q10: If we don’t find what we want on your website, what should we do?
A: You can email us the descriptions and pictures of the products you need, We will check whether we can make it.

How to Design a Forging Spur Gear

Before you start designing your own spur gear, you need to understand its main components. Among them are Forging, Keyway, Spline, Set screw and other types. Understanding the differences between these types of spur gears is essential for making an informed decision. To learn more, keep reading. Also, don’t hesitate to contact me for assistance! Listed below are some helpful tips and tricks to design a spur gear. Hopefully, they will help you design the spur gear of your dreams.
Gear

Forging spur gears

Forging spur gears is one of the most important processes of automotive transmission components. The manufacturing process is complex and involves several steps, such as blank spheroidizing, hot forging, annealing, phosphating, and saponification. The material used for spur gears is typically 20CrMnTi. The process is completed by applying a continuous through extrusion forming method with dies designed for the sizing band length L and Splitting angle thickness T.
The process of forging spur gears can also use polyacetal (POM), a strong plastic commonly used for the manufacture of gears. This material is easy to mold and shape, and after hardening, it is extremely stiff and abrasion resistant. A number of metals and alloys are used for spur gears, including forged steel, stainless steel, and aluminum. Listed below are the different types of materials used in gear manufacturing and their advantages and disadvantages.
A spur gear’s tooth size is measured in modules, or m. Each number represents the number of teeth in the gear. As the number of teeth increases, so does its size. In general, the higher the number of teeth, the larger the module is. A high module gear has a large pressure angle. It’s also important to remember that spur gears must have the same module as the gears they are used to drive.

Set screw spur gears

A modern industry cannot function without set screw spur gears. These gears are highly efficient and are widely used in a variety of applications. Their design involves the calculation of speed and torque, which are both critical factors. The MEP model, for instance, considers the changing rigidity of a tooth pair along its path. The results are used to determine the type of spur gear required. Listed below are some tips for choosing a spur gear:
Type A. This type of gear does not have a hub. The gear itself is flat with a small hole in the middle. Set screw gears are most commonly used for lightweight applications without loads. The metal thickness can range from 0.25 mm to 3 mm. Set screw gears are also used for large machines that need to be strong and durable. This article provides an introduction to the different types of spur gears and how they differ from one another.
Pin Hub. Pin hub spur gears use a set screw to secure the pin. These gears are often connected to a shaft by dowel, spring, or roll pins. The pin is drilled to the precise diameter to fit inside the gear, so that it does not come loose. Pin hub spur gears have high tolerances, as the hole is not large enough to completely grip the shaft. This type of gear is generally the most expensive of the three.
Gear

Keyway spur gears

In today’s modern industry, spur gear transmissions are widely used to transfer power. These types of transmissions provide excellent efficiency but can be susceptible to power losses. These losses must be estimated during the design process. A key component of this analysis is the calculation of the contact area (2b) of the gear pair. However, this value is not necessarily applicable to every spur gear. Here are some examples of how to calculate this area. (See Figure 2)
Spur gears are characterized by having teeth parallel to the shafts and axis, and a pitch line velocity of up to 25 m/s is considered high. In addition, they are more efficient than helical gears of the same size. Unlike helical gears, spur gears are generally considered positive gears. They are often used for applications in which noise control is not an issue. The symmetry of the spur gear makes them especially suitable for applications where a constant speed is required.
Besides using a helical spur gear for the transmission, the gear can also have a standard tooth shape. Unlike helical gears, spur gears with an involute tooth form have thick roots, which prevents wear from the teeth. These gears are easily made with conventional production tools. The involute shape is an ideal choice for small-scale production and is one of the most popular types of spur gears.

Spline spur gears

When considering the types of spur gears that are used, it’s important to note the differences between the two. A spur gear, also called an involute gear, generates torque and regulates speed. It’s most common in car engines, but is also used in everyday appliances. However, one of the most significant drawbacks of spur gears is their noise. Because spur gears mesh only one tooth at a time, they create a high amount of stress and noise, making them unsuitable for everyday use.
The contact stress distribution chart represents the flank area of each gear tooth and the distance in both the axial and profile direction. A high contact area is located toward the center of the gear, which is caused by the micro-geometry of the gear. A positive l value indicates that there is no misalignment of the spline teeth on the interface with the helix hand. The opposite is true for negative l values.
Using an upper bound technique, Abdul and Dean studied the forging of spur gear forms. They assumed that the tooth profile would be a straight line. They also examined the non-dimensional forging pressure of a spline. Spline spur gears are commonly used in motors, gearboxes, and drills. The strength of spur gears and splines is primarily dependent on their radii and tooth diameter.
SUS303 and SUS304 stainless steel spur gears

Stainless steel spur gears are manufactured using different techniques, which depend on the material and the application. The most common process used in manufacturing them is cutting. Other processes involve rolling, casting, and forging. In addition, plastic spur gears are produced by injection molding, depending on the quantity of production required. SUS303 and SUS304 stainless steel spur gears can be made using a variety of materials, including structural carbon steel S45C, gray cast iron FC200, nonferrous metal C3604, engineering plastic MC901, and stainless steel.
The differences between 304 and 303 stainless steel spur gears lie in their composition. The two types of stainless steel share a common design, but have varying chemical compositions. China and Japan use the letters SUS304 and SUS303, which refer to their varying degrees of composition. As with most types of stainless steel, the two different grades are made to be used in industrial applications, such as planetary gears and spur gears.
Gear

Stainless steel spur gears

There are several things to look for in a stainless steel spur gear, including the diametral pitch, the number of teeth per unit diameter, and the angular velocity of the teeth. All of these aspects are critical to the performance of a spur gear, and the proper dimensional measurements are essential to the design and functionality of a spur gear. Those in the industry should be familiar with the terms used to describe spur gear parts, both to ensure clarity in production and in purchase orders.
A spur gear is a type of precision cylindrical gear with parallel teeth arranged in a rim. It is used in various applications, such as outboard motors, winches, construction equipment, lawn and garden equipment, turbine drives, pumps, centrifuges, and a variety of other machines. A spur gear is typically made from stainless steel and has a high level of durability. It is the most commonly used type of gear.
Stainless steel spur gears can come in many different shapes and sizes. Stainless steel spur gears are generally made of SUS304 or SUS303 stainless steel, which are used for their higher machinability. These gears are then heat-treated with nitriding or tooth surface induction. Unlike conventional gears, which need tooth grinding after heat-treating, stainless steel spur gears have a low wear rate and high machinability.

China Golden Vidar Nozzle Pressure Gasket C13 2.00-2.54mm 0.02mm First Gear for C11 C13 C15 Fuel Injectors     bevel gearboxChina Golden Vidar Nozzle Pressure Gasket C13 2.00-2.54mm 0.02mm First Gear for C11 C13 C15 Fuel Injectors     bevel gearbox
editor by CX 2023-03-27