China Helical Gear Steel C45 Material hypoid bevel gear

Merchandise Description

CZPT Equipment delivers a broad variety of large good quality Timing Belt Pulleys and Toothed Bars/ Timing Bars.  Standard and non-normal pulleys according to drawings are accessible.

 

Kinds of material:
  1. AlCuMgPb 6061 6082 Aluminum Timing Pulley
  2. C45E 1045 S45C Carbon Metal Timing Pulley
  3. GG25 HT250 Solid Iron Timing Pulley
  4. SUS303 SUS304 AISI431 Stainless Metal Timing Pulley
  5. Other substance on demand from customers, this kind of as cooper, bronze and plastic
 
Types of surface area therapy
 1.  Anodized area -Aluminum Pulleys
 2.  Hard anodized area — Aluminum Pulleys
 3.  Black Oxidized surface — Steel Pulleys
 4. Zinc plated area — Steel Pulleys
 5. Chromate surface — Steel Pulleys Solid Iron Pulleys
 6. Nickel plated area –Metal Pulleys Solid Iron Pulleys
 
Kinds of tooth profile

Tooth Profile Pitch
HTD 3M,5M,8M,14M,20M
AT AT5,AT10,AT20
T T2.5,T5,T10
MXL .08″(2.032MM)
XL 1/5″(5.08MM)
L three/8″(9.525MM)
H one/2″(12.7MM)
XH seven/8″(22.225MM)
XXH one 1/4″(31.75MM)
STS STPD S2M,S3M,S4.5M,S5M,S8M,S14M
RPP RPP5M,RPP8M,RPP14M,RPP20M
PGGT PGGT  2GT, 3GT and 5GT
PCGT GT8M,GT14M

 
Types of pitches and sizes

Imperial Inch Timing Belt Pulley:
1.  Pilot Bore MXL571 for 6.35mm timing belt enamel amount from sixteen to 72
two.  Pilot Bore XL037 for 9.53mm timing belt  teeth amount from 10 to 72
3.  Pilot Bore, Taper Bore L050 for twelve.7mm timing belt enamel variety from ten to a hundred and twenty
four.  Pilot Bore, Taper Bore L075 for 19.05mm timing belt enamel quantity from ten to a hundred and twenty
5.  Pilot Bore, Taper Bore L100 for 25.4mm timing belt teeth amount from 10 to a hundred and twenty
six.  Pilot Bore, Taper Bore H075 for 19.05mm timing belt enamel quantity from 14 to fifty
7.  Pilot Bore, Taper Bore H100 for 25.4mm timing belt teeth variety from fourteen to 156
8.  Pilot Bore, Taper Bore H150 for 38.1mm timing belt teeth number from 14 to 156
nine.  Pilot Bore, Taper Bore H200 for fifty.8mm timing belt tooth amount from 14 to 156
ten.  Pilot Bore, Taper Bore H300 for seventy six.2mm timing belt enamel quantity from fourteen to 156
eleven.  Taper Bore XH200 for 50.8mm timing belt tooth amount from eighteen to 120
12.  Taper Bore XH300 for seventy six.2mm timing belt tooth quantity from eighteen to one hundred twenty
thirteen.  Taper Bore XH400 for one zero one.6mm timing belt tooth amount from 18 to one hundred twenty

Metric Timing Belt Pulley T and AT
1.  Pilot Bore T2.5-16 for 6mm timing belt teeth quantity from twelve to 60 
2.   Pilot Bore T5-21 for 10mm timing belt enamel amount from ten to 60 
three.   Pilot Bore T5-27 for 16mm timing belt teeth quantity from 10 to 60 
4.   Pilot Bore T5-36 for 25mm timing belt teeth quantity from 10 to 60 
5.   Pilot Bore T10-31 for 16mm timing belt tooth variety from twelve to 60 
six.   Pilot Bore T10-40 for 25mm timing belt tooth quantity from 12 to 60 
7.   Pilot Bore T10-47 for 32mm timing belt enamel quantity from eighteen to 60 
eight.   Pilot Bore T10-66 for 50mm timing belt teeth number from 18 to sixty
9.  Pilot Bore AT5-21 for 10mm timing belt teeth quantity from 12 to sixty
ten. Pilot Bore AT5-27 for 16mm timing belt tooth amount from 12 to sixty
eleven. Pilot Bore AT5-36 for 25mm timing belt enamel number from 12 to 60 
twelve. Pilot Bore AT10-31 for 16mm timing belt tooth amount from 15 to 60 
13. Pilot Bore AT10-40 for 25mm timing belt enamel number from 15 to 60 
14. Pilot Bore AT10-47 for 32mm timing belt enamel variety from 18 to 60 
15. Pilot Bore AT10-66 for 50mm timing belt enamel number from 18 to sixty
  
Metric Timing Belt Pulley HTD3M, 5M, 8M, 14M 
one.  HTD3M-06 3M-09 3M-15 teeth number from 10 to 72 
2.  HTD5M-09 5M-fifteen 5M-twenty five enamel number from 12 to 72 
three.  HTD8M-twenty 8M-thirty 8M-50 8M-85 teeth number from 22 to 192 
four.  HTD14M-40 14M-55 14M-85 14M-115 14M-a hundred and seventy tooth quantity from 28-216 
5.  Taper Bore HTD5M-15 8M-twenty 8M-30 8M-fifty 8M-eighty five 14M-40 14M-55 14M-85
         14M-one hundred fifteen 14M-a hundred and seventy

Metric Timing Belt Pulleys for Poly Chain GT2 Belts 
1.      PCGT8M-twelve PCGT8M-21 PCGT8M-36 PCGT8M-62 
two.      PCGT14M-twenty PCGT14M-37 PCGT14M-68 PCGT14M-ninety PCGT14M-a hundred twenty five

Electricity Grip CZPT Tooth/ PGGT 2GT, 3GT and 5GT 
one. 2GT-06, 2GT-09 for timing belt width 6mm and 9mm 
two. 3GT-09, 3GT-15 for timing belt width 9mm and 15mm 
three. 5GT-fifteen, 5GT-twenty five for timing belt width 15mm and 25mm

OMEGA RPP HTD Timing Pulleys 
1.   RPP3M-06 3M-09 3M-15 teeth variety from ten to 72 
two.   RPP5M-09 5M-fifteen 5M-twenty five tooth quantity from 12 to 72 
three.   RPP8M-twenty 8M-thirty 8M-fifty 8M-85 teeth number from 22 to 192 
4.   RPP14M-forty 14M-fifty five 14M-85 14M-a hundred and fifteen 14M-170 teeth amount from 28-216 
5.  Taper Bore RPP5M-15 8M-twenty 8M-30 8M-50 8M-85 14M-40 14M-5514M-85
     14M-one hundred fifteen 14M-a hundred and seventy

US $1.3
/ Piece
|
1 Piece

(Min. Order)

###

Pulley Sizes: Timing
Manufacturing Process: Saw
Material: Alloy
Surface Treatment: Chrome-Free Dacromet
Application: Chemical Industry, Grain Transport, Mining Transport, Power Plant
Aluminum: Red Anodized

###

Customization:

###

Teeth Profile Pitch
HTD 3M,5M,8M,14M,20M
AT AT5,AT10,AT20
T T2.5,T5,T10
MXL 0.08"(2.032MM)
XL 1/5"(5.08MM)
L 3/8"(9.525MM)
H 1/2"(12.7MM)
XH 7/8"(22.225MM)
XXH 1 1/4"(31.75MM)
STS STPD S2M,S3M,S4.5M,S5M,S8M,S14M
RPP RPP5M,RPP8M,RPP14M,RPP20M
PGGT PGGT  2GT, 3GT and 5GT
PCGT GT8M,GT14M
US $1.3
/ Piece
|
1 Piece

(Min. Order)

###

Pulley Sizes: Timing
Manufacturing Process: Saw
Material: Alloy
Surface Treatment: Chrome-Free Dacromet
Application: Chemical Industry, Grain Transport, Mining Transport, Power Plant
Aluminum: Red Anodized

###

Customization:

###

Teeth Profile Pitch
HTD 3M,5M,8M,14M,20M
AT AT5,AT10,AT20
T T2.5,T5,T10
MXL 0.08"(2.032MM)
XL 1/5"(5.08MM)
L 3/8"(9.525MM)
H 1/2"(12.7MM)
XH 7/8"(22.225MM)
XXH 1 1/4"(31.75MM)
STS STPD S2M,S3M,S4.5M,S5M,S8M,S14M
RPP RPP5M,RPP8M,RPP14M,RPP20M
PGGT PGGT  2GT, 3GT and 5GT
PCGT GT8M,GT14M

The Difference Between Planetary Gears and Spur Gears

A spur gear is a type of mechanical drive that turns an external shaft. The angular velocity is proportional to the rpm and can be easily calculated from the gear ratio. However, to properly calculate angular velocity, it is necessary to know the number of teeth. Fortunately, there are several different types of spur gears. Here’s an overview of their main features. This article also discusses planetary gears, which are smaller, more robust, and more power-dense.
Planetary gears are a type of spur gear

One of the most significant differences between planetary gears and spurgears is the way that the two share the load. Planetary gears are much more efficient than spurgears, enabling high torque transfer in a small space. This is because planetary gears have multiple teeth instead of just one. They are also suitable for intermittent and constant operation. This article will cover some of the main benefits of planetary gears and their differences from spurgears.
While spur gears are more simple than planetary gears, they do have some key differences. In addition to being more basic, they do not require any special cuts or angles. Moreover, the tooth shape of spur gears is much more complex than those of planetary gears. The design determines where the teeth make contact and how much power is available. However, a planetary gear system will be more efficient if the teeth are lubricated internally.
In a planetary gear, there are three shafts: a sun gear, a planet carrier, and an external ring gear. A planetary gear is designed to allow the motion of one shaft to be arrested, while the other two work simultaneously. In addition to two-shaft operation, planetary gears can also be used in three-shaft operations, which are called temporary three-shaft operations. Temporary three-shaft operations are possible through frictional coupling.
Among the many benefits of planetary gears is their adaptability. As the load is shared between several planet gears, it is easier to switch gear ratios, so you do not need to purchase a new gearbox for every new application. Another major benefit of planetary gears is that they are highly resistant to high shock loads and demanding conditions. This means that they are used in many industries.
Gear

They are more robust

An epicyclic gear train is a type of transmission that uses concentric axes for input and output. This type of transmission is often used in vehicles with automatic transmissions, such as a Lamborghini Gallardo. It is also used in hybrid cars. These types of transmissions are also more robust than conventional planetary gears. However, they require more assembly time than a conventional parallel shaft gear.
An epicyclic gearing system has three basic components: an input, an output, and a carrier. The number of teeth in each gear determines the ratio of input rotation to output rotation. In some cases, an epicyclic gear system can be made with two planets. A third planet, known as the carrier, meshes with the second planet and the sun gear to provide reversibility. A ring gear is made of several components, and a planetary gear may contain many gears.
An epicyclic gear train can be built so that the planet gear rolls inside the pitch circle of an outer fixed gear ring, or “annular gear.” In such a case, the curve of the planet’s pitch circle is called a hypocycloid. When epicycle gear trains are used in combination with a sun gear, the planetary gear train is made up of both types. The sun gear is usually fixed, while the ring gear is driven.
Planetary gearing, also known as epicyclic gear, is more durable than other types of transmissions. Because planets are evenly distributed around the sun, they have an even distribution of gears. Because they are more robust, they can handle higher torques, reductions, and overhung loads. They are also more energy-dense and robust. In addition, planetary gearing is often able to be converted to various ratios.
Gear

They are more power dense

The planet gear and ring gear of a compound planetary transmission are epicyclic stages. One part of the planet gear meshes with the sun gear, while the other part of the gear drives the ring gear. Coast tooth flanks are used only when the gear drive works in reversed load direction. Asymmetry factor optimization equalizes the contact stress safety factors of a planetary gear. The permissible contact stress, sHPd, and the maximum operating contact stress (sHPc) are equalized by asymmetry factor optimization.
In addition, epicyclic gears are generally smaller and require fewer space than helical ones. They are commonly used as differential gears in speed frames and in looms, where they act as a Roper positive let off. They differ in the amount of overdrive and undergearing ratio they possess. The overdrive ratio varies from fifteen percent to forty percent. In contrast, the undergearing ratio ranges from 0.87:1 to 69%.
The TV7-117S turboprop engine gearbox is the first known application of epicyclic gears with asymmetric teeth. This gearbox was developed by the CZPT Corporation for the Ilyushin Il-114 turboprop plane. The TV7-117S’s gearbox arrangement consists of a first planetary-differential stage with three planet gears and a second solar-type coaxial stage with five planet gears. This arrangement gives epicyclic gears the highest power density.
Planetary gearing is more robust and power-dense than other types of gearing. They can withstand higher torques, reductions, and overhung loads. Their unique self-aligning properties also make them highly versatile in rugged applications. It is also more compact and lightweight. In addition to this, epicyclic gears are easier to manufacture than planetary gears. And as a bonus, they are much less expensive.

They are smaller

Epicyclic gears are small mechanical devices that have a central “sun” gear and one or more outer intermediate gears. These gears are held in a carrier or ring gear and have multiple mesh considerations. The system can be sized and speeded by dividing the required ratio by the number of teeth per gear. This process is known as gearing and is used in many types of gearing systems.
Planetary gears are also known as epicyclic gearing. They have input and output shafts that are coaxially arranged. Each planet contains a gear wheel that meshes with the sun gear. These gears are small and easy to manufacture. Another advantage of epicyclic gears is their robust design. They are easily converted into different ratios. They are also highly efficient. In addition, planetary gear trains can be designed to operate in multiple directions.
Another advantage of epicyclic gearing is their reduced size. They are often used for small-scale applications. The lower cost is associated with the reduced manufacturing time. Epicyclic gears should not be made on N/C milling machines. The epicyclic carrier should be cast and tooled on a single-purpose machine, which has several cutters cutting through material. The epicyclic carrier is smaller than the epicyclic gear.
Epicyclic gearing systems consist of three basic components: an input, an output, and a stationary component. The number of teeth in each gear determines the ratio of input rotation to output rotation. Typically, these gear sets are made of three separate pieces: the input gear, the output gear, and the stationary component. Depending on the size of the input and output gear, the ratio between the two components is greater than half.
Gear

They have higher gear ratios

The differences between epicyclic gears and regular, non-epicyclic gears are significant for many different applications. In particular, epicyclic gears have higher gear ratios. The reason behind this is that epicyclic gears require multiple mesh considerations. The epicyclic gears are designed to calculate the number of load application cycles per unit time. The sun gear, for example, is +1300 RPM. The planet gear, on the other hand, is +1700 RPM. The ring gear is also +1400 RPM, as determined by the number of teeth in each gear.
Torque is the twisting force of a gear, and the bigger the gear, the higher the torque. However, since the torque is also proportional to the size of the gear, bigger radii result in lower torque. In addition, smaller radii do not move cars faster, so the higher gear ratios do not move at highway speeds. The tradeoff between speed and torque is the gear ratio.
Planetary gears use multiple mechanisms to increase the gear ratio. Those using epicyclic gears have multiple gear sets, including a sun, a ring, and two planets. Moreover, the planetary gears are based on helical, bevel, and spur gears. In general, the higher gear ratios of epicyclic gears are superior to those of planetary gears.
Another example of planetary gears is the compound planet. This gear design has two different-sized gears on either end of a common casting. The large end engages the sun while the smaller end engages the annulus. The compound planets are sometimes necessary to achieve smaller steps in gear ratio. As with any gear, the correct alignment of planet pins is essential for proper operation. If the planets are not aligned properly, it may result in rough running or premature breakdown.

China Helical Gear Steel C45 Material     hypoid bevel gearChina Helical Gear Steel C45 Material     hypoid bevel gear
editor by czh 2023-01-03