Product Description
SPROCKET 1/2” X 5/16” 08B SERIES SPROCKETS
| For Chain Acc.to DIN8187 ISO/R 606 | |||||
| Tooth Radius r3 | 13.0mm | ||||
| Radius Width C | 1.3mm | ||||
| Tooth Width b1 | 7.0mm | ||||
| Tooth Width B1 | 7.2mm | ||||
| Tooth Width B2 | 21.0mm | ||||
| Tooth Width B3 | 34.9mm | ||||
| 08B SERIES ROLLER CHAINS | |||||
| Pitch | 12.7 mm | ||||
| Internal Width | 7.75 mm | ||||
| Roller Diameter | 8.51 mm | ||||
| Z | de | dp | SIMPLEX | DUPLEX | TRIPLEX |
| D1 | D2 | D3 | |||
| 8 | 37.2 | 33.18 | 8 | 10 | 10 |
| 9 | 41.0 | 37.13 | 8 | 10 | 10 |
| 10 | 45.2 | 41.10 | 8 | 10 | 10 |
| 11 | 48.7 | 45.07 | 10 | 10 | 12 |
| 12 | 53.0 | 49.07 | 10 | 10 | 12 |
| 13 | 57.4 | 53.06 | 10 | 10 | 12 |
| 14 | 61.8 | 57.07 | 10 | 10 | 12 |
| 15 | 65.5 | 61.09 | 10 | 10 | 12 |
| 16 | 69.5 | 65.10 | 10 | 12 | 16 |
| 17 | 73.6 | 69.11 | 10 | 12 | 16 |
| 18 | 77.8 | 73.14 | 10 | 12 | 16 |
| 19 | 81.7 | 77.16 | 10 | 12 | 16 |
| 20 | 85.8 | 81.19 | 10 | 12 | 16 |
| 21 | 89.7 | 85.22 | 12 | 16 | 16 |
| 22 | 93.8 | 89.24 | 12 | 16 | 16 |
| 23 | 98.2 | 93.27 | 12 | 16 | 16 |
| 24 | 101.8 | 97.29 | 12 | 16 | 16 |
| 25 | 105.8 | 101.33 | 12 | 16 | 16 |
| 26 | 110.0 | 105.36 | 16 | 16 | 16 |
| 27 | 114.0 | 109.40 | 16 | 16 | 16 |
| 28 | 118.0 | 113.42 | 16 | 16 | 16 |
| 29 | 122.0 | 117.46 | 16 | 16 | 16 |
| 30 | 126.1 | 121.50 | 16 | 16 | 16 |
| 31 | 130.2 | 125.54 | 16 | 16 | 20 |
| 32 | 134.3 | 129.56 | 16 | 16 | 20 |
| 33 | 138.4 | 133.60 | 16 | 16 | 20 |
| 34 | 142.6 | 137.64 | 16 | 16 | 20 |
| 35 | 146.7 | 141.68 | 16 | 16 | 20 |
| 36 | 151.0 | 145.72 | 16 | 20 | 20 |
| 37 | 154.6 | 149.76 | 16 | 20 | 20 |
| 38 | 158.6 | 153.80 | 16 | 20 | 20 |
| 39 | 162.7 | 157.83 | 16 | 20 | 20 |
| 40 | 166.8 | 161.87 | 16 | 20 | 20 |
| 41 | 171.4 | 165.91 | 20 | 20 | 25 |
| 42 | 175.4 | 169.94 | 20 | 20 | 25 |
| 43 | 179.7 | 173.98 | 20 | 20 | 25 |
| 44 | 183.8 | 178.02 | 20 | 20 | 25 |
| 45 | 188.0 | 182.07 | 20 | 20 | 25 |
| 46 | 192.1 | 186.10 | 20 | 20 | 25 |
| 47 | 196.2 | 190.14 | 20 | 20 | 25 |
| 48 | 200.3 | 194.18 | 20 | 20 | 25 |
| 49 | 204.3 | 198.22 | 20 | 20 | 25 |
| 50 | 208.3 | 202.26 | 20 | 20 | 25 |
| 51 | 212.1 | 206.30 | 20 | 25 | 25 |
| 52 | 216.1 | 210.34 | 20 | 25 | 25 |
| 53 | 220.2 | 214.37 | 20 | 25 | 25 |
| 54 | 224.1 | 218.43 | 20 | 25 | 25 |
| 55 | 228.1 | 222.46 | 20 | 25 | 25 |
| 56 | 232.2 | 226.50 | 20 | 25 | 25 |
| 57 | 236.4 | 230.54 | 20 | 25 | 25 |
| 58 | 240.5 | 234.58 | 20 | 25 | 25 |
| 59 | 244.5 | 238.62 | 20 | 25 | 25 |
| 60 | 248.6 | 242.66 | 20 | 25 | 25 |
| 62 | 256.9 | 250.74 | 25 | 25 | 25 |
| 64 | 265.1 | 258.82 | 25 | 25 | 25 |
| 65 | 269.0 | 262.86 | 25 | 25 | 25 |
| 66 | 273.0 | 266.91 | 25 | 25 | 25 |
| 68 | 281.0 | 274.99 | 25 | 25 | 25 |
| 70 | 289.0 | 283.07 | 25 | 25 | 25 |
| 72 | 297.2 | 291.15 | 25 | 25 | 25 |
| 75 | 309.2 | 303.28 | 25 | 25 | 25 |
| 76 | 313.2 | 307.32 | 25 | 25 | 25 |
| 78 | 321.4 | 315.40 | 25 | 25 | 25 |
| 80 | 329.4 | 323.49 | 25 | 25 | 25 |
| 85 | 349.0 | 343.69 | 25 | 25 | 25 |
| 90 | 369.9 | 363.90 | 25 | 25 | 25 |
| 95 | 390.1 | 384.11 | 25 | 25 | 25 |
| 100 | 410.3 | 404.32 | 25 | 25 | 25 |
| 110 | 450.7 | 444.74 | 25 | 25 | 25 |
| 114 | 466.9 | 460.91 | 25 | 25 | 25 |
| 120 | 491.2 | 485.16 | 25 | 25 | 25 |
| 125 | 511.3 | 505.37 | 25 | 25 | 25 |
BASIC INFO.
|
Type: |
Simplex, Duplex, Triplex |
|
Sprocket Model: |
3/8″,1/2″,5/8″,3/4″,1″,1.25″,1.50″,1.75″,2.00″,2.25″,2.00″,2.25″,2.50″, 3″ |
|
Teeth Number: |
9-100 |
|
Standard: |
ANSI , JIS, DIN, ISO |
|
Material: |
1571, 1045, SS304 , SS316; As Per User Request. |
|
Performance Treatment: |
Carburizing, High Frequency Treatment, Hardening and Tempering, Nitriding |
|
Surface Treatment: |
Black of Oxidation, Zincing, Nickelage. |
| Characteristic | Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, etc |
| Design criterion | ISO DIN ANSI & Customer Drawings |
| Application | Industrial transmission equipment |
| Package | Wooden Case / Container and pallet, or made-to-order |
|
Certification: |
ISO9001 SGS |
|
Quality Inspection: |
Self-check and Final-check |
|
Sample: |
ODM&OEM, Trial Order Available and Welcome |
| Advantage | Quality first, Service first, Competitive price, Fast delivery |
| Delivery Time | 10 days for samples. 15 days for official order. |
INSTALLATION AND USING
The chain spocket, as a drive or deflection for chains, has pockets to hold the chain links with a D-profile cross section with flat side surfaces parallel to the centre plane of the chain links, and outer surfaces at right angles to the chain link centre plane. The chain links are pressed firmly against the outer surfaces and each of the side surfaces by the angled laying surfaces at the base of the pockets, and also the support surfaces of the wheel body together with the end sides of the webs formed by the leading and trailing walls of the pocket.
NOTICE
When fitting new chainwheels it is very important that a new chain is fitted at the same time, and vice versa. Using an old chain with new sprockets, or a new chain with old sprockets will cause rapid wear.
It is important if you are installing the chainwheels yourself to have the factory service manual specific to your model. Our chainwheels are made to be a direct replacement for your OEM chainwheels and as such, the installation should be performed according to your models service manual.
During use a chain will stretch (i.e. the pins will wear causing extension of the chain). Using a chain which has been stretched more than the above maximum allowance causes the chain to ride up the teeth of the sprocket. This causes damage to the tips of the chainwheels teeth, as the force transmitted by the chain is transmitted entirely through the top of the tooth, rather than the whole tooth. This results in severe wearing of the chainwheel.
FOR CHAIN STHangZhouRDS
Standards organizations (such as ANSI and ISO) maintain standards for design, dimensions, and interchangeability of transmission chains. For example, the following Table shows data from ANSI standard B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Society of Mechanical Engineers (ASME). See the references[8][9][10] for additional information.
ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load25
| ASME/ANSI B29.1-2011 Roller Chain Standard Sizes | ||||
| Size | Pitch | Maximum Roller Diameter | Minimum Ultimate Tensile Strength | Measuring Load |
|---|---|---|---|---|
| 25 | 0.250 in (6.35 mm) | 0.130 in (3.30 mm) | 780 lb (350 kg) | 18 lb (8.2 kg) |
| 35 | 0.375 in (9.53 mm) | 0.200 in (5.08 mm) | 1,760 lb (800 kg) | 18 lb (8.2 kg) |
| 41 | 0.500 in (12.70 mm) | 0.306 in (7.77 mm) | 1,500 lb (680 kg) | 18 lb (8.2 kg) |
| 40 | 0.500 in (12.70 mm) | 0.312 in (7.92 mm) | 3,125 lb (1,417 kg) | 31 lb (14 kg) |
| 50 | 0.625 in (15.88 mm) | 0.400 in (10.16 mm) | 4,880 lb (2,210 kg) | 49 lb (22 kg) |
| 60 | 0.750 in (19.05 mm) | 0.469 in (11.91 mm) | 7,030 lb (3,190 kg) | 70 lb (32 kg) |
| 80 | 1.000 in (25.40 mm) | 0.625 in (15.88 mm) | 12,500 lb (5,700 kg) | 125 lb (57 kg) |
| 100 | 1.250 in (31.75 mm) | 0.750 in (19.05 mm) | 19,531 lb (8,859 kg) | 195 lb (88 kg) |
| 120 | 1.500 in (38.10 mm) | 0.875 in (22.23 mm) | 28,125 lb (12,757 kg) | 281 lb (127 kg) |
| 140 | 1.750 in (44.45 mm) | 1.000 in (25.40 mm) | 38,280 lb (17,360 kg) | 383 lb (174 kg) |
| 160 | 2.000 in (50.80 mm) | 1.125 in (28.58 mm) | 50,000 lb (23,000 kg) | 500 lb (230 kg) |
| 180 | 2.250 in (57.15 mm) | 1.460 in (37.08 mm) | 63,280 lb (28,700 kg) | 633 lb (287 kg) |
| 200 | 2.500 in (63.50 mm) | 1.562 in (39.67 mm) | 78,175 lb (35,460 kg) | 781 lb (354 kg) |
| 240 | 3.000 in (76.20 mm) | 1.875 in (47.63 mm) | 112,500 lb (51,000 kg) | 1,000 lb (450 kg |
For mnemonic purposes, below is another presentation of key dimensions from the same standard, expressed in fractions of an inch (which was part of the thinking behind the choice of preferred numbers in the ANSI standard):
| Pitch (inches) | Pitch expressed in eighths |
ANSI standard chain number |
Width (inches) |
|---|---|---|---|
| 1⁄4 | 2⁄8 | 25 | 1⁄8 |
| 3⁄8 | 3⁄8 | 35 | 3⁄16 |
| 1⁄2 | 4⁄8 | 41 | 1⁄4 |
| 1⁄2 | 4⁄8 | 40 | 5⁄16 |
| 5⁄8 | 5⁄8 | 50 | 3⁄8 |
| 3⁄4 | 6⁄8 | 60 | 1⁄2 |
| 1 | 8⁄8 | 80 | 5⁄8 |
Notes:
1. The pitch is the distance between roller centers. The width is the distance between the link plates (i.e. slightly more than the roller width to allow for clearance).
2. The right-hand digit of the standard denotes 0 = normal chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The left-hand digit denotes the number of eighths of an inch that make up the pitch.
4. An “H” following the standard number denotes heavyweight chain. A hyphenated number following the standard number denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes number 60 heavyweight triple-strand chain.
A typical bicycle chain (for derailleur gears) uses narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not affect the load capacity. The more sprockets at the rear wheel (historically 3-6, nowadays 7-12 sprockets), the narrower the chain. Chains are sold according to the number of speeds they are designed to work with, for example, “10 speed chain”. Hub gear or single speed bicycles use 1/2″ x 1/8″ chains, where 1/8″ refers to the maximum thickness of a sprocket that can be used with the chain.
Typically chains with parallel shaped links have an even number of links, with each narrow link followed by a broad one. Chains built up with a uniform type of link, narrow at 1 and broad at the other end, can be made with an odd number of links, which can be an advantage to adapt to a special chainwheel-distance; on the other side such a chain tends to be not so strong.
Roller chains made using ISO standard are sometimes called as isochains.
WHY CHOOSE US
1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed CZPT Marketing Network
7. Efficient After-Sale Service System
The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.
We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CZPT range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.
| Standard Or Nonstandard: | Standard |
|---|---|
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car, Mining Machinery, Sugar Machinery |
| Hardness: | Hardened Tooth Surface |
| Manufacturing Method: | Cut Gear |
| Toothed Portion Shape: | Spur Gear |
| Material: | Alloy |
| Samples: |
US$ 0/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Benefits and Uses of Miter Gears
If you’ve ever looked into the differences between miter gears, you’re probably wondering how to choose between a Straight toothed and Hypoid one. Before you decide, however, make sure you know about backlash and what it means. Backlash is the difference between the addendum and dedendum, and it prevents jamming of the gears, protects the mating gear surfaces, and allows for thermal expansion during operation.
Spiral bevel gears
Spiral bevel gears are designed to increase efficiency and reduce cost. The spiral shape creates a profile in which the teeth are cut with a slight curve along their length, making them an excellent choice for heavy-duty applications. Spiral bevel gears are also hypoid gears, with no offsets. Their smaller size means that they are more compact than other types of right-angle gears, and they are much quieter than other types of gear.
Spiral bevel gears feature helical teeth arranged in a 90-degree angle. The design features a slight curve to the teeth, which reduces backlash while increasing flexibility. Because they have no offsets, they won’t slip during operation. Spiral bevel gears also have less backlash, making them an excellent choice for high-speed applications. They are also carefully spaced to distribute lubricant over a larger area. They are also very accurate and have a locknut design that prevents them from moving out of alignment.
In addition to the geometric design of bevel gears, CZPT can produce 3D models of spiral bevel gears. This software has gained widespread attention from many companies around the world. In fact, CZPT, a major manufacturer of 5-axis milling machines, recently machined a prototype using a spiral bevel gear model. These results prove that spiral bevel gears can be used in a variety of applications, ranging from precision machining to industrial automation.
Spiral bevel gears are also commonly known as hypoid gears. Hypoid gears differ from spiral bevel gears in that their pitch surface is not at the center of the meshing gear. The benefit of this gear design is that it can handle large loads while maintaining its unique features. They also produce less heat than their bevel counterparts, which can affect the efficiency of nearby components.
Straight toothed miter gears
Miter gears are bevel gears that have a pitch angle of 90 degrees. Their gear ratio is 1:1. Miter gears come in straight and spiral tooth varieties and are available in both commercial and high precision grades. They are a versatile tool for any mechanical application. Below are some benefits and uses of miter gears. A simple explanation of the basic principle of this gear type is given. Read on for more details.
When selecting a miter gear, it is important to choose the right material. Hard faced, high carbon steel is appropriate for applications requiring high load, while nylon and injection molding resins are suitable for lower loads. If a particular gear becomes damaged, it’s advisable to replace the entire set, as they are closely linked in shape. The same goes for spiral-cut miter gears. These geared products should be replaced together for proper operation.
Straight bevel gears are the easiest to manufacture. The earliest method was using an indexing head on a planer. Modern manufacturing methods, such as the Revacycle and Coniflex systems, made the process more efficient. CZPT utilizes these newer manufacturing methods and patented them. However, the traditional straight bevel is still the most common and widely used type. It is the simplest to manufacture and is the cheapest type.
SDP/Si is a popular supplier of high-precision gears. The company produces custom miter gears, as well as standard bevel gears. They also offer black oxide and ground bore and tooth surfaces. These gears can be used for many industrial and mechanical applications. They are available in moderate quantities from stock and in partial sizes upon request. There are also different sizes available for specialized applications.
Hypoid bevel gears
The advantages of using Hypoid bevel and helical gears are obvious. Their high speed, low noise, and long life make them ideal for use in motor vehicles. This type of gear is also becoming increasingly popular in the power transmission and motion control industries. Compared to standard bevel and helical gears, they have a higher capacity for torque and can handle high loads with less noise.
Geometrical dimensioning of bevel/hypoid bevel gears is essential to meet ANSI/AGMA/ISO standards. This article examines a few ways to dimension hypoid bevel and helical gears. First, it discusses the limitations of the common datum surface when dimensioning bevel/helical gear pairs. A straight line can’t be parallel to the flanks of both the gear and the pinion, which is necessary to determine “normal backlash.”
Second, hypoid and helical gears have the same angular pitch, which makes the manufacturing process easier. Hypoid bevel gears are usually made of two gears with equal angular pitches. Then, they are assembled to match one another. This reduces noise and vibration, and increases power density. It is recommended to follow the standard and avoid using gears that have mismatched angular pitches.
Third, hypoid and helical gears differ in the shape of the teeth. They are different from standard gears because the teeth are more elongated. They are similar in appearance to spiral bevel gears and worm gears, but differ in geometry. While helical gears are symmetrical, hypoid bevel gears are non-conical. As a result, they can produce higher gear ratios and torque.
Crown bevel gears
The geometrical design of bevel gears is extremely complex. The relative contact position and flank form deviations affect both the paired gear geometry and the tooth bearing. In addition, paired gears are also subject to process-linked deviations that affect the tooth bearing and backlash. These characteristics require the use of narrow tolerance fields to avoid quality issues and production costs. The relative position of a miter gear depends on the operating parameters, such as the load and speed.
When selecting a crown bevel gear for a miter-gear system, it is important to choose one with the right tooth shape. The teeth of a crown-bevel gear can differ greatly in shape. The radial pitch and diametral pitch cone angles are the most common. The tooth cone angle, or “zerol” angle, is the other important parameter. Crown bevel gears have a wide range of tooth pitches, from flat to spiral.
Crown bevel gears for miter gear are made of high-quality materials. In addition to metal, they can be made of plastic or pre-hardened alloys. The latter are preferred as the material is less expensive and more flexible than steel. Furthermore, crown bevel gears for miter gears are extremely durable, and can withstand extreme conditions. They are often used to replace existing gears that are damaged or worn.
When selecting a crown bevel gear for a miter gear, it is important to know how they relate to each other. This is because the crown bevel gears have a 1:1 speed ratio with a pinion. The same is true for miter gears. When comparing crown bevel gears for miter gears, be sure to understand the radii of the pinion and the ring on the pinion.
Shaft angle requirements for miter gears
Miter gears are used to transmit motion between intersecting shafts at a right angle. Their tooth profile is shaped like the mitre hat worn by a Catholic bishop. Their pitch and number of teeth are also identical. Shaft angle requirements vary depending on the type of application. If the application is for power transmission, miter gears are often used in a differential arrangement. If you’re installing miter gears for power transmission, you should know the mounting angle requirements.
Shaft angle requirements for miter gears vary by design. The most common arrangement is perpendicular, but the axes can be angled to almost any angle. Miter gears are also known for their high precision and high strength. Their helix angles are less than ten degrees. Because the shaft angle requirements for miter gears vary, you should know which type of shaft angle you require before ordering.
To determine the right pitch cone angle, first determine the shaft of the gear you’re designing. This angle is called the pitch cone angle. The angle should be at least 90 degrees for the gear and the pinion. The shaft bearings must also be capable of bearing significant forces. Miter gears must be supported by bearings that can withstand significant forces. Shaft angle requirements for miter gears vary from application to application.
For industrial use, miter gears are usually made of plain carbon steel or alloy steel. Some materials are more durable than others and can withstand higher speeds. For commercial use, noise limitations may be important. The gears may be exposed to harsh environments or heavy machine loads. Some types of gears function with teeth missing. But be sure to know the shaft angle requirements for miter gears before you order one.
editor by CX 2023-05-23
China Chain and sprocket factory : High stainless steel conveyor roller chain China in Dhanbad India Quality Motorcycle Chains with ce certificate top quality low price
We – EPG Group the largest Chain and agricultural gearbox manufacturing unit in China with 5 diverse branches. For much more particulars: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828
Our goods are created by modern computerized equipment and tools.a specialised provider of a total range of chains, sprockets, gears, equipment racks, V-belts, couplings and reducers， pto shaft, agricultural gearboxes….We Our firm pays specific interest to customers’ demands, listening to the particular demands of each consumer and guaranteeing complete satisfaction.search forward to the possibility to provide you and hope to incorporate you to our growing family members of content clients. No other range of chains can conquer EPG for range. Apart from standard roller chains of all varieties and sizes, roller chains with attachments and double pitch roller chains, we also offer special chains these kinds of as grip chains, accumulation chains, elastomeric profile chains, leaf chains, bushed conveyor chains, hollow pin chains and a lot of other versions. Upkeep-totally free or corrosion-proof chains are accessible for particular purposes. Our pin oven chains and tube conveyor chains enable a extensive assortment of solutions for the efficient manufacturing and the best possible conveying of cans and tubes. Discover out more about our solution Launched in 1998, EPT Chains EPT Co., Ltd. has far more than 80 employees, and its general floorage occupies 50,000 square meters. As a scientific and technological business. For the pa EPT two decades, EPT has been devoting itself to the manufacturing of all kinds of chains.By adopting sophisticated equipments and creation strategies, it is ISO, ANSI, BS, DIN and JIS quality stHangZhourds accredited.
Primary 4 classes of products are bike chain, stHangZhourd chain, agricultural machinery chain and industrial non-stHangZhourd & specific chain. twenty five subsection sorts include brief pitch precision roller chain of A & B series and spinoff conveyor chain, bush chain, heavy obligation cranked hyperlink chain, motorcycle transmission and motor chain, leaf chain , pintle chain, attract bench chain, self-lubrication chain, hollow-pin chain, drag roller chain, welded cranked website link chain, block conveyor chain, extended-pitch key engineering metric and inch chain, agricultural machinery conveyor chain, agricultural machinery clap chain, scraper conveyor chain, cement hoi EPT chain and so on. The 1000’s of specifications have been commonly used in industrial, agricultural, hoisting, and highway-developing, fore EPT harvesting, wooden processing machines, paper industry, folk-li EPT industry, area parking system, Car: +86~13083988828 assembling line, home appliance industry, daily chemical sector, mine & metallurgy industry, coating sector, can-creating business, so on and so forth. eighty% of lectstyle’s merchandise are marketed during the planet like Europe, The usa, Japan, Middle Ea EPT and Southea EPT Asia.
Your OEM orders are also warmly welcomed, it is our motivation to satisfy your necessity, remember to tur EPT that we will be your dependable organization spouse for our very good track record, good high quality and aggressive cost!
Item Description
ISO 9001 StHangZhourd Roller Chain and EPT Chain, with alloy metal and stainless metal assortment in accordance to your need
one. Chain sorts: Roller Chain, conveyor chain, transmission chain, bike roller chain, agricultural chain, oil field chains, weld metal drag chains, unique chains and many others
two, Primary supplies: It is 40Mn. 40Cr, 45Mn alloy steel, ten#, 20#, 20CrMnMo, 20Mn, 30CrMnTi for pins and rollers
3, Warmth treatment method: Carburizing, Austemper Stressing, nitro-caburizing harden and so forth
four, Surface area: Shot peening, black, blue or first
five, Package way: Polybag + Box + Carton + Iron Pallet
We are a major producer of mechanical transmission spare elements, as well as a number of years a single of dependable and dependable distributors for European, The us, Iran industry and so on. Our major objects are roller chains, conveyor chains, transmission chain, equipment shafts, roller bearings, rollers, needle bearings and so on.
At existing, For North American, European, and Asian market place, our outstanding merchandise are fabricated in accordance to your prerequisite and our good quality meets ISO, API stHangZhourd.
I hope we can do enterprise together, and look forward to hearing from you soon.
The use of unique equipment manufacturer’s (OEM) component quantities or trademarks , e.g. CASE® and John Deere® are for reference functions only and for indicating solution use and compatibility. Our organization and the shown substitute elements contained herein are not sponsored, authorized, or made by the OEM.
Best made in China – replacement parts – Chain & sprocket manufacturer : ISO606 beumer chain bucket elevator in Izmir Turkey Standard Stainless Steel Roller Chains with Attachment with ce certificate top quality low price
We – EPG Team the most significant Chain and agricultural gearbox manufacturing facility in China with 5 distinct branches. For more information: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828
The team has taken element in the making and revising of ISO/TC100 international chain regular numerous many years in achievement and hosted the 16th ISO/TC100 Worldwide yearly conference in 2004. ISO In addition, WE CAN Generate Tailored VARIATORS, GEARED MOTORS, Electrical MOTORS AND OTHER HYDRAULIC Items In accordance TO CUSTOMERS’ DRAWINGS.9001 licensed producer of precision roller chains. Kinds incorporate single and numerous strand, hollow pin, side bow, rollerless, self-lubricating, straight sidebar, double pitch, brushed, nickel plated, armor coated, 304 stainless metal, leaf, hoist and O-ring, citrus, sorting and caterpillar roller chains. ISO 9001, ISO/TS 16949 and AS9100 certified. Maker of common and personalized roller chains for use in a wide assortment of apps. Roller chains are available in solitary-pitch, double-pitch and precision kinds. Satisfies or exceed ANSI requirements.
| Product | StHangZhourd Transmission Roller Chains | Design | Collection A, Sequence B |
| Row | Simplex/Duplex/Triplex | Application | EPT Elements |
| Surface area Teatment | Self-coloration/Sand-blasted/Shot-peening | Manufacturer | OEM |
| Deal | Poly bag, then box, ultimately poly-picket case | Port | Any sea port or airport in China |
The use of authentic gear manufacturer’s (OEM) element figures or logos , e.g. CASE® and John Deere® are for reference reasons only and for indicating product use and compatibility. Our organization and the outlined replacement elements contained herein are not sponsored, accredited, or produced by the OEM.
Hollow made in China – replacement parts – rc 100 roller chain in Nottingham United Kingdom Pin Chains with Small Roller-C50HP By Carbon Steel with ce certificate top quality low price
We – EPG Group the biggest Chain and agricultural gearbox manufacturing unit in China with 5 distinct branches. For more particulars: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828
Our major items are chain , gears, sprocket, Needle Roller bearings, Cylindrical Roller Bearings, Rod finish Bearings, Spherical simple bearings, Monitor roller Bearings for Guideway, Roller Bearings, Mix Bearings for forklifts, Drinking water Pump Bearings, SNR Car Bearings and all kinds of Spherical Bearings. Competence focus in electrical power transmission merchandise Chain,pto shaft, agricultural gearboxes , CATV products, mechanical seal, hydraulic and Pheumatic, and promotional merchandise.for industrial chains and sprockets It is our every day problem to source our customers with the optimal merchandise – that signifies optimum for the necessary software and for the customers’ particular demands. In some instances it signifies that we truly create and manufacture very special chain varieties for one particular specific client. In purchase to be ready to do so, a few items are crucial: EPG power transmission products are developed to provide the two trustworthy functionality and value-efficiency. Each merchandise is utility-tested and engineered to satisfy stringent expectations for uniformity in dimension, heat treatment, tensile power and other essential qualities. As a price-powerful option made especially for common-obligation use, EPG’s expanding line of items are accessible in all usually requested dimensions and technical specs, like ball bearings, mounted units, roller chain, seals, gauges, sheaves and far more.
A.Our Services
1. Any of your sort inquiry lumber conveyor chain would be replied inside 24 hrs.
2. Nicely-skilled and knowledgeable income staffs will reply all your issues in fluent English.
three. OEM solutions are obtainable with us, our expert designer would make your private idea into becoming.
4. Safety of your income area, tips of design and all your private info.
5. Shipping and delivery by air mail or ship for your orders.
six. With a long time of manufacture and advertising encounter in international marketplace, delivers you revenue and fantastic accomplishment!
B.Technical parameters
C. Organization show & Merchandise method
D. Packaging
| Packaging Information: | Chain+Plastic Bag+ EPT Box+Wooden case+Large Carton+Metal Pallets |
| Shipping Detail: | 6 months |
E. FAQ
1. Are you company or trade Firm?
We are a factory founded in 1991 with trade group for global service.
2. What conditions of payment you normally use?
T/T thirty% deposit and 70% once again EPT doc, Western Union, L/C at sight
three. what is your lead time for your merchandise?
Generally 45 times following verified purchase. thirty days could be available in lower season for some things (throughout Might to July), and 65 times in the course of new yr and sizzling season ( Jan to March).
4. Do you go to any Show?
We go to Hannover show in Germany, N EPT in Austrilia, Canton honest, PTC, in China and several EPT special home furniture shows.
five. Do you have any immediate chat ?
The use of first tools manufacturer’s (OEM) element quantities or logos , e.g. CASE® and John Deere® are for reference purposes only and for indicating item use and compatibility. Our business and the listed alternative parts contained herein are not sponsored, authorized, or made by the OEM.
China Chain and sprocket factory : Standard ansi 80 roller chain China in Volgograd Russian Federation Stainless Steel Motorcycle Roller Chains with ce certificate top quality low price
We – EPG Group the largest Chain and agricultural gearbox manufacturing facility in China with 5 distinct branches. For far more information: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828
With detailed requirments, we can also develop your unique made solution. a specialised supplier of a total range of chains, sprockets, gears, gear racks, V-belts, couplings and reducers， pto shaft, agricultural gearboxes….Our our products are selling effectively in the American, European, South American and Asian markets. a specialised supplier of a complete assortment of chains, sprockets, gears, equipment racks, V-belts, couplings and reducers， pto shaft, agricultural gearboxes….big stock levels on zinc plated, reliable steel shaft collars assure prompt gratification of any dimension prerequisite. Unplated, black-oxide and stainless steel sound collars are readily accessible. Black-oxide metal clamp kind collars are in the same way stocked for unbeatable provider. Mounted bearing and linear bearing orders are frequently shipped within 24 hrs and our flip-all around time on minimize-to-size linear shafting will exceed your expectations. Producer of standard and custom made roller chains. Appropriate for getting older, stress relieving, warmth managing and powder coating programs. Aerospace, automotive, navy, vitality, composite, pharmaceutical and various other industries served. Turnkey systems integration and most things accessible in stock. Professionally manufacture all very good quality chains&periodProducts are produced of high high quality alloy metal manufacturing&time period The plates are punched and squeezed bores by precision engineering&period roller chian are machined by large-efficiency computerized equipment and automated grinding gear&comma then through warmth treatment of carburization&comma carbon and nitrogen protection mesh belt furnace&comma surface area blasting process and so forth&period Assembled precision by Inner gap position&comma spin riveted by stress to make sure the functionality of the total chain
This stHangZhourd roller chain is a long life chain that will function with stHangZhourd sprockets on agricultural and industrial gear&periodFeatures&colon
Fulfills ASME&solANSI B29&period1 stHangZhourds Chain is pre lubricated for put on resistance Pitch 1&sol2″ Size&colon 10′ Shot peened in the course of manufacturing
to boost metallic fatigue resistance For use in agricultural and industrial equipment&period
Tensile power&colon 2&comma830 lbs&time period
Roller Diameter&colon &period306&period
Roller Width&colon &period246&period
Pin Diameter&colon &period141&period of time
Hyperlink Plate Thickness&colon &period050&interval
Link Plate “H”&colon &period390&time period
Pin Duration “R”&colon &period541&period of time
one&periodSuperior quality&commahigh efficiency longevity&commareasonable price&semi
2&periodFine workmanship&comma gorgeous packing &commastrong marketplace demanding&semi
1&rpar OEM quality stHangZhourd quaranteed
two&rpar Long Lasting doing work life time
three&rpar Positive buyer comments from overseas and domestic marketplaces
four&rpar Professional machinery components producer for fourteen a long time
five&rpar Competitive value
six&rpar Supplies equipment parts manufactured to consumer specs and drawings
7&rpar Sample goal order approved
8&rpar Ready for provide all of you about the term &comma any time
one&period of time We are a manufacturer&interval
2&time period We have about thirty many years expertise of making chains and chain links&period of time
3&interval Our layout team has substantial expertise in the chain design&time period
four&interval Be EPT provider and prompt shipping and delivery&period of time
5&period of time We offer you different styles&comma dimension and shades to meet up with your prerequisite&period
six&period We covering a production area of 18750 sq. meters have a lot more than two hundred personnel and we have a complete established of testing tools to make certain our qualit
Make contact with Details
No&period of time 169&comma South Xihu (West Lake) Dis. Highway&comma Baiyang Industrial Location&comma Xihu (West Lake) Dis.&comma HangZhou&comma ZHangZhoug&comma China
Make contact with person&colon Mr&interval Jam
Cellular: +86~13083988828&colon – 579 – 87616111
Fax&colon – 579 – 87616111
MP&colon -13095885125
Website&colon www&periodzschain&periodcom
The use of authentic equipment manufacturer’s (OEM) component numbers or logos , e.g. CASE® and John Deere® are for reference functions only and for indicating merchandise use and compatibility. Our company and the listed substitution parts contained herein are not sponsored, accepted, or manufactured by the OEM.